How to exchange the load cell of the CSP V3

Attention: The steps listed involve disassembling certain components of the product. A detailed manual is attached at the bottom of this article, which explains each step with both images and text for your reference.

Tools needed:

Flat screwdriver - various 

Hex key 2.5 x 110mm

The load cell can be ordered directly from our spare parts shop.

Please follow all steps carefully, proceeding step by step:

Remove screws from load cell with a 2.5 hex key

Push the load cell from left side to the right and pull it out

Unplug load cell from the PCBA

Push the pedal bar down with the screwdriver

(Be careful not to scratch pedals!)

When holding pedal bar with the Screwdriver, push the load cell from the other side back to its place

Pull the cable true cable holders

Connect load cell into the brake port

Turn back 3 screws with a 2.5 hex key

Once you have performed the steps listed above, connect the CSP V3 to your PC or wheel base, open the Fanatec app and verify the proper functionality of your device(s).

We also suggest double-checking in game.