How to exchange the throttle spring of the CSP V3

Attention: The steps listed involve disassembling certain components of the product. A detailed manual is attached at the bottom of this article, which explains each step with both images and text for your reference.

Tools needed:

Hex key 3 x 110mm

The throttle spring can be ordered directly from our spare parts shop.

Please follow all steps carefully, proceeding step by step:

Remove 2 screws which hold throttle block with a 3 mm hex key and place them safely

Push black block toward pedal and pull it out of its position

Remove black block and place it safely

Remove throttle spring

Place new throttle spring on joint

Turn back black block on joint

Push the black block toward pedal and turn it back on its place - 4 threads should be turned up

Tighten 2 screws with a 3 mm hex key

Once you have performed the steps listed above, connect the CSP V3 to your PC or wheel base, open the Fanatec app and verify the proper functionality of your device(s).

We also suggest double-checking in game.