Fanatec App v1.4.2.3 Release Notes

Release Date: 05 May 2026

💻 Download Links

Windows

• Fanatec App v1.4.2.3

What’s new in Fanatec App v1.4.2.3?

🛠️ Improvements & Bug fixes

New Products/Features:

• Added support for ClubSport Steering Wheel Formula V3
• Added support for Fanatec Wheel Hub
• Torque boost for CS DD (from 12 Nm to 15 Nm) and CS DD+ (From 15 Nm to 18 Nm) Wheelbases

Podium DD1/2 Bases:

• Fixed DRK button of the BMW M4 GT3 Steering Wheel not working when the Tuning Menu is

  open.

Podium DD and ClubSport DD Bases:

• Fixed CBP screen sometimes gets stuck on the BMW M4 GT3 Steering Wheel and Button

  Module Rally.

• Fixed center calibration button combination and corrected calibration request message accordingly of the Button Module Rally.
• Fixed left FunkySwitch misses a lot of rotational inputs on the Bentley GT3 Steering Wheel.
• Fixed H-Shifter calibration freezes after setting 7th gear on the Bentley GT3 Steering Wheel.
• Fixed inverted Joystick axis of the Button Module Endurance when used with a ClubSport Universal Hub V2.
• Fixed button layout issues of the ClubSport Universal Hub V2.
• Fixed missing Tuning Menu settings (NDP, NFR, NIN, INT) after QR update.
• Improved the Force Feedback quality of the Podium DD Base.

• Raised the holding torque of ClubSport DD from 12 Nm to 15 Nm and ClubSport DD+ from 15

  Nm to 18 Nm.

CSL DD and GT DD Pro Bases:

• Fixed Endstop strength depends on FFB strength - now the Endstop is always 100% independent from the set FFB strength.
• Fixed circle and R3 buttons working unreliable on PlayStation.
• Fixed DRK button of the BMW M4 GT3 Steering Wheel not working when the Tuning Menu is open.
• Fixed Shifter Paddles of the ClubSport Universal Hub V1 not working.
• Fixed BRF sometimes resets after Base restart.
• Fixed wrong default value of Joysticks which caused wheels without Joysticks to permanently look left/right or having an ingame cursour moving to one side.
• Fixed missing Tuning Menu settings (SPR, DPR) after WB or QR update.

GT Extreme Steering Wheel:

• Reworked the complete Tuning Menu to fix several text issues.
• Partially reworked the ITM to fix several issues. There are still some known issues with the ITM on this wheel which will be fixed with the next bugfix update.

OLED Steering Wheels:

• Fixed some text inconsistencies of some Tuning Menu names and description texts.

Fanatec App:

• Fixed favourite profile tag getting lost after some time.
• Fixed deletion of multiple profiles at once not possible.
• Fixed wrong interval preset values.
• Fixed Button LEDs turn off when starting games.
• Fixed Pitlane LEDs don't get static when the interval slider was moved from static to a ms value and then back to static.
• Fixed focus issues in the UI where some changes were not properly applied.
• Fixed Fanatec App automatically setting a fixed port and not the one the user wants.
• Fixed UDP port forwarding not working.
• Fixed shifter mode in UI is sometimes mismatching with the actual hardware mode.
• Fixed Tuning Menu preview issues.
• Fixed Recommended FFB profiles could be edited, renamed or even deleted accidentally.
• Fixed not working SAVE PROFILE button.
• Fixed wrong hint text for the SAVE PROFILE button.
• Fixed input bar for analogue clutch paddle input on the steering wheel page not reaching 100%.
• Fixed App not detecting hardware on first launch when the handbrake is connected via USB Adapter.
• Fixed handbrake calibration not working properly on the handbrake page.
• Fixed Set Max calibration missing on ClubSport V3 pedals copnnected via USB.
• Fixed wrong pedal detection for USB pedals when detaching a wheel or when changing certain wheel settings.
• Fixed incorrect pedals being shown when disconnecting and reconnecting them via RJ12 to the Base.
• Fixed several general device detection issues.
• Fixed missing Mouse Emulation Tab when the Button Module Endurance is connected to a ClubSport Universal Hub V2.
• Fixed BME not shown but only P Hub after reconnecting the wheel.
• Fixed wrong ITM template for the Bentley GT3 wheel.
• Fixed App freezing when performing multiple FullForce test loops.
• Fixed App crashing if the App tour is started when no hardware is connected.
• Fixed App crashing if the LED App tour was started manually by disabling the begin button.
• Fixed rare error message when closing the App by adding a previously missing plugin.
• Fixed calculation of Max Torque for CS DD and Podium DD Bases.
• Fixed Torque Mode of the Podium DD Base is always shown as Low Torque Mode.\
• Fixed profile saving/loading issues with the Podium DD.
• Added new Podium DD image to the Firmware Manager.
• Added a copy button on the bottom right to copy the firmware versions of the connected hardware.
• Added car binding overwrite functionality.
• Added new CarsLists which include the latest car releases from the games.
• Improved the performance in games when the App is running.
• Improved button backlight color selection where the color palette now also opens when you click on the button instead of the paint button.
• Improved the general scaling and spacing of the UI.
• Improved the scaling of some Steering Wheel images.
• Improved the Change image selector for Steering Wheels.
• Improved side scrolling for available games on welcome home page.
• Improved loading game profiles by adding possibility to load profiles with a double-click.
• Reworked the game profile management page for easier navigation, saving and loading profiles and edit car bindings.
• Removed torque value and torque mode when no wheel is attached to the base as the base cannot output any FFB without a wheel attached.
• Replaced the release highlights in the news section on the welcome home page with links to news articles from the Fanatec Blog so you stay up-to-date with our most recent news.
• Updated the recommended FFB profiles for the CS DD and CS DD+ to accommodate the torque increase of these bases.
• Updated Shared Memory API for AC EVO to support newest changes made in 0.6 game update.

Note: The Fanatec driver and app are only compatible with Windows. To update firmware or access additional features, you’ll need a Windows desktop or laptop. At this time, our software doesn’t support other operating systems like Linux or iOS, and it’s not compatible with ARM-based Snapdragon processors.