Self Help - Accelerator, brake or clutch does not work

In order to cross out an issue with the wiring of the pedals, we recommend performing the following. This issue can occur when not having the pedals connected properly to the CSL Pedals Load Cell Kit Pedal. Make sure that you have the pedals connected as described below:

(Warning: Connecting the cables to the wrong ports can damage the electronics and prevent the pedals from functioning!)

1. Without Load Cell:

- Gas Pedal to Wheel Base (Wheel Base/Load Cell Port to Pedals Port in the Wheel Base)

- Brake Pedal to Gas Pedal (Brake RJ12 Connector to Brake Port in Gas Pedal)

2. With Load Cell:

- Load Cell Pedal to Wheel Base (Load Cell/Wheel Base Port to Pedals Port in the Wheel Base)

- Gas Pedal to Load Cell Pedal (Gas Load Cell/Wheel Base Port to Load Cell Port in the Load Cell Pedal)

- Clutch to Gas Pedal (Clutch 12 Connector to Clutch Port in the Gas Pedal)

You can also refer to our video guide by following this link.

In case the issue is still persisting, or you are not able to perform the steps mentioned, we advise opening a support ticket. In order to speed up the process, it would be helpful if you could also provide us with the following additional information.

- Did the issue occur out of the box?

- A short video illustrating the issue.